Products

DESCRIPTION

Basic Info

Model NO.	6-GFM-200-WAG
Installation	Packaged
Rechargeable	Chargeable
Approx Weight	48~56kg
Unit/Carton	1
Carton Dimension	535*253*278mm
Transport Package	Carton/ Pallet
Specification	522*239*218mm
Trademark	Gangang
Origin	China
Production Capacity	600 PCS/Day

Product Description

Long Life 12V 200AH 192AH 184AH AGM VRLA UPS Inverter and Solar System Lead Acid Battery

Specification Type
Model NO.	Volts	Capacity(AH)	Approx Dimension(mm)	Approx Weight(kg)	Unit/carton(pcs)	Carton Dimension(mm)
		20hrs rate	L*W*H
12V7AH	12	7	151*65*95	2.1	10	353*320*130
12V12AH	12	12	151*99*95	3.6	8	415*315*120
12V17AH	12	17	181*76*167	6	4	365*179*210
12V24AH	12	24	165*125*175	8	2	263*176*198
12V38AH	12	38	197*166*171	12	2	345*205*210
12V65AH	12	65	350*166*173	20	1	365*179*210
12V100AH	12	100	329*172*216	29	1	350*186*265
12V120AH	12	120	406*173*237	33	1	420*186*270
12V150AH	12	150	483*170*239	41	1	496*183*273
12V200AH	12	200	522*239*218	56	1	535*253*278

Battery connectionOnly batteries or battery packs with the same actual capacity can be used in series.The connection part shall be tight to prevent sparks; in case of poor contact, the contact surtace can be cleaned with soda water.Only batteries or battery groups with the same actual voltage can be used in parallel,The positive and negative poles shall not be reversed or short circuited.The batteries of the battery pack shall be separated by more than 10 mm to facllitate heat dissipation.Battery chargingFloating charge (limit voltage, control current) use: charging voltage 2.20-2.30V single cell (25 C).When trickle current is used, the floating charge current of the battery is adjusted to less than 2mAl ah;Temperature compensation, the temperature compensation coefficient of each monomer is 3MV c.(based on20 'ºC)Cyclic use (stop when fully charged, charge when fully discharged):charging voltage 2.35-2.45v single call maximum power.The flow shall not be greater than 25%of the nominal capacity;Note:the battery shall not be used in closed or high temperatdre environment, and shall be kept away from the fire source.Storage and installation1.For batteries not put into use, the connecting wire shall be removed, the pole sheath shall be covered and wiped clean;2.Maintain and charge the battery every three months. T he charging method is limited current and constant voltageMethod: the initial charging current is 0.1CA, and the charging volltage is 24V single cell (at 25 c);3.The battery shall be stored in a dry and ventilated place, away from direct sunlight and heat source.4.When handling the battery, the force shall be even, and the stress part is the shell artof the batfery to avoid damaging the pole;5.Insulating tools shall be used during installation to prevent electric shock.Points to note
1.When the batlery is discharged from the factory. do not attempt to disassemble the battery to avoid danger .if the battery shell s damagedaccidentally ln case of contact with sulfuric acid, please wash with plenty of clear water immediately, and see a doctor immediatly if necessary2.Do not mix the old and new batteries;3.Do not use battery in sealed container;4.The battery shall have a complete resume , including factory date, installation date, operation record, etc;5.Regularly (once a year) check whether the connecting wire is loose. lf it is loose, fasten it;6.Wipe the battery regularly (once every three months) with soft fabric to keep the battery clean;7.Do not use organic solvents to clean the battery.8.Pay attention to the battery spacing to prevent salt bridge.